FREE SHIPPING
on Safety Orders Over $99 or $8.99 Flat Rate Shipping on Orders Below $99 *Exclusions Apply*
IMPORTANT SHIPPING INFORMATION
Time-Sensitive Order?
Call 877-902-9417 or email cs@rajsupply.com to verify availability and shipping lead time.
ATG MaxiDry 56-426 Ultra Lightweight Nitrile Glove with Seamless Knit Nylon Liner and Non-Slip MicroFoam Grip on Palm & Fingers – Fully Coated Gauntlet – Dozen
$102.42
Known and loved across the globe MaxiFlex® has become the world standard for precision handling gloves in dry environments. People have been asking ATG® to make an oil repellent MaxiFlex® that’s still super thin, flexible, dexterous and comfortable. So they did. Here it is. They call it MaxiDry®.
FEATURES
- Seamless string knit shell is comfortable and flexible
- Foam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance
- Knit Wrist helps prevent dirt and debris from entering the glove
- Liquid Repellence – Increased resistance to oils via ATG’s LiquiTech® technology platform
- Ultra Lightweight- Synthetic coating combined with an industry leading super light seamless knit liner provides excellent comfort, sensitivity, fit and dexterity
- Locking Cuff – Ensures the glove doesn’t slip on the hand. An exclusive elasticated support in the wrist area provides a “locking” effect for a close and snug fit
- Optimized Grip – The micro-cup non-slip grip finish allows for a controlled and superior grip in oily and wet applications. The nonslip grip is only applied where it is actually needed – in the palm area – to ensure flexibility isn’t compromised
- All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation
- This glove has been laundered prior to final packaging making it clean and safe for use
- The Oeko-Tex® Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
- The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product
EN388 RESULTS: 4111X
EN 388 2016 Results:Abrasion: 4Cut (Coupe Test): 1Tear: 1Puncture: 1Cut (TDM-100 Test):Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove’s ratings. Click here for more information about the EN 388 2016 standard.
ANSI ABRASION LEVEL: 3
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
END OF LIFE – RECYCLABLE VIA TERRACYCLE® PROGRAM
Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn More.
EXTENDED LIFE – REUSABLE/LAUNDERABLE
Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.
| Size |
X-Small ,Small ,Medium ,Large ,XLarge ,2X |
|---|---|
| Brand | |
| Material |
Nylon |
| Coating |
Nitrile |
| Liner Material |
Elastane |
| Package Quantity |
12 Pairs |
| Thickness |
18 Gauge |
| Style |
General Purpose – Coated |
It is important to know how to measure the hand to get a proper fitting glove. Measuring the hand for correct fit will give the employee the best possible protection without compromising the task, duty or safety of the wearer. There are two suggested ways to find the correct glove size. One way is to measure the width of the hand — measure around the hand (a dominant hand measurement is preferred) with a tape measure as shown below. The dominant hand will be the right if you are right-handed and left if you are left-handed.
If the gloves you are purchasing come in numbered sizes, you can relate the measurement directly to the numerical size listed for the glove. For example, if the measurement taken is exactly eight inches (203 millimeters) then you would select a size eight glove. To avoid hand fatigue, order the next larger size for all measurements that are not exact inch/millimeter measurements. If the gloves you are purchasing come in extra-small (XS), small (S), medium (M), large (L), extra-large (XL) or double extra-large (XXL), use the table below to translate the inch/millimeter measurement.
If the gloves you are purchasing come in numbered sizes, you can relate the measurement directly to the numerical size listed for the glove. For example, if the measurement taken is exactly eight inches (203 millimeters) then you would select a size eight glove. To avoid hand fatigue, order the next larger size for all measurements that are not exact inch/millimeter measurements. If the gloves you are purchasing come in extra-small (XS), small (S), medium (M), large (L), extra-large (XL) or double extra-large (XXL), use the table below to translate the inch/millimeter measurement.
| US Sizes | EU Sizes | ||
| 6–7 Inches | XS | 152–178 Milimeters | EU – 6 |
| 7–8 Inches | S | 178–203 Milimeters | EU – 7 |
| 8–9 Inches | M | 203–229 Milimeters | EU – 8 |
| 9–10 Inches | L | 229–254 Milimeters | EU – 9 |
| 10–11 Inches | XL | 254–279 Milimeters | EU – 10 |
| 11 + Inches | XXL | 279 + Milimeters | EU – 11 |
Source: Turtleskin Glove/Warwick Mills, Inc.
Another method is to measure the length of your hand by measuring from the bottom edge of the palm to the tip of the longest finger as illustrated below.
| US Sizes | EU Sizes | ||
| 6 5/16 Inches | XS | 160 Milimeters | EU – 6 |
| 6 3/4 Inches | S | 171 Milimeters | EU – 7 |
| 7 3/16 Inches | M | 182 Milimeters | EU – 8 |
| 7 9/16 Inches | L | 192 Milimeters | EU – 9 |
| 8 1/16 Inches | XL | 204 Milimeters | EU – 10 |
| 8 7/16 + Inches | XXL | 215 + Milimeters | EU – 11 |
Source: Turtleskin Glove/Warwick Mills, Inc.
There are six (6) classes of electrical gloves, and you know which class you need based on the voltages you will be working with. You can find the full OSHA guidelines in standard 29 CFR 1910.137
- Class 00 – Protects workers up to 500 VAC and 750 VDC
- Class 0 – Protects workers up to 1,000 VAC and 1,500 VDC
- Class 1 – Protects workers up to 7,500 VAC and 11,250 VDC
- Class 2 – Protects workers up to 17,000 VAC and 25,000 VDC
- Class 3 – Protects workers up to 26,500 VAC and 39,750 VDC
- Class 4 – Protects workers up to 36,000 VAC and 54,000 VDC
6843 N. Citrus Ave Ste. W Crystal River, Florida 34428 USA
We offer logo service on many of the PPE products we sell. To receive a custom quote please use this request form.
Related products
ATG MaxiFlex 34-845 Endurance Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles – Dozen
DEWALT DPG250 Vibration Reducing Premium Padded Glove, Pair (CLOSEOUT)
PIP 120-MX2805 Maximum Safety Professional Mechanic’s Gloves, Black, 1 Pair (CLOSEOUT)
