Retrofit Waterstop System for New to Existing Concrete Joints
Includes all batten bars and anchors
125 ft Head of H2O | 10 lft / roll | 2 lbs lft
Retrofit waterstop is designed to provide a fluid-tight seal between existing and new concrete construction, without resorting to the labor-intensive and structurally destructive saw-cut-and-grout method. It is ideal for constructing a new containment curb or wall to an existing slab or joining a new slab to an existing wall. Special profile fabrications are available for columns and pipe penetrations.
All JP Specialties retrofit waterstops are sold as a complete system and include all the necessary stainless steel bars and anchors/bolts
Earth Shield® Polyvinyl Chloride (PVC) Waterstop Basic Use
JP Specialties Earth Shield® Polyvinyl Chloride (PVC) Waterstop is used as a fluid-tight diaphragm, embedded in concrete, across and along the joint, for environmental engineered concrete structures. Earth Shield® Flexible PVC Waterstops are resistant to a wide range of water and wastewater treatment chemicals and are certified to meet or exceed the performance requirements of CRD C572-74.
- pvc waterstop sweets product catalog (PDF)
- pvc waterstop submittal package (PDF)
- pvc waterstop installation guides
- pvc waterstop specifications (PDF)
- pvc waterstop specifications (MS Word)
- pvc waterstop CAD details (PDF and DWG)
- pvc waterstop chemical resistant chart
- pvc waterstop sds sheets
- pvc waterstop technical data sheet (PDF)
Earth Shield® Advantages
- • Outstanding fluid resistance to a wide range of aqueous-based water and wastewater treatment chemicals
- • Meets ACI 350 “Code Requirements for Environmental Engineering Concrete Structures”
- • CRD C572-74 compliant
Install Earth Shield® Flexible PVC Waterstop in all concrete joints. Waterstop should be centered in, and run the extent of the joint. All changes of directions should be prefabricated, leaving only butt-welding for the field. If installing in an expansion joint, keep center bulb unembedded to allow it to accommodate movement as designed. Use optional factory installed brass eyelets (or #3 hog rings) and tie wire to secure waterstop to reinforcing steel to avoid displacement during the concrete pour. Splice straight lengths of waterstop and Shop Made Fittings to straight lengths, with an ST-10® In-Line Waterstop Splicer with the iron temperature set to 350°F to 380°F.