FREE SHIPPING
on Safety Orders Over $99 or $8.99 Flat Rate Shipping on Orders Below $99 *Exclusions Apply*
IMPORTANT SHIPPING INFORMATION
Time-Sensitive Order?
Call 877-902-9417 or email cs@rajsupply.com to verify availability and shipping lead time.
ANSI/ISEA 105 – CUT A1 | ABRASION 6 | PUNCTURE 2
EN388 – ABRASION 4 | CUT 1 | TEAR 3 | PUNCTURE 1 | CUT TDM-100 X
Experience the durability of GL601HV safety gloves with level 6 abrasion protection. Enjoy superior grip and visibility in wet or oily conditions, thanks to micro-foam nitrile palms and a hi-vis 15G nylon/spandex liner. Plus, touchscreen compatibility and reinforced thumb saddles enhance safety.
-
Enhanced Grip: Micro-foam nitrile dipped palm and fingers for superior grip in wet or oily conditions, channeling liquids away
-
Hi-Vis Precise Performance: Hi-vis 15G nylon/spandex liner strikes an ideal balance of flexibility, durability and sensitivity ensuring superior handling and mobility
-
Seamless Durability: Reinforced thumb saddle designed for longevity and added protection in high-stress areas
-
Hygiene Defense: Treated with Sanitized Actifresh® to combat bacteria for prolonged comfort and freshness
-
Screen Ease: Touchscreen compatibility enables seamless connectivity without removing gloves
-
Sure Seal: Knit wrist cuff ensures added security, comfort and functionality
-
Tried and Tested: Meets ANSI/ISEA 105 – CUT A1 | ABRASION 6 | PUNCTURE 2 and EN 388 – 4131X, ensuring quality and safety
| Size |
X-Small ,Small ,Medium ,Large ,XLarge ,2X ,3X |
|---|---|
| Brand | |
| Features |
Touchscreen Compatible |
| Material |
Nylon |
| Coating |
Nitrile |
| Package Quantity |
12 Pairs |
| Style |
General Purpose – Coated |
It is important to know how to measure the hand to get a proper fitting glove. Measuring the hand for correct fit will give the employee the best possible protection without compromising the task, duty or safety of the wearer. There are two suggested ways to find the correct glove size. One way is to measure the width of the hand — measure around the hand (a dominant hand measurement is preferred) with a tape measure as shown below. The dominant hand will be the right if you are right-handed and left if you are left-handed.
If the gloves you are purchasing come in numbered sizes, you can relate the measurement directly to the numerical size listed for the glove. For example, if the measurement taken is exactly eight inches (203 millimeters) then you would select a size eight glove. To avoid hand fatigue, order the next larger size for all measurements that are not exact inch/millimeter measurements. If the gloves you are purchasing come in extra-small (XS), small (S), medium (M), large (L), extra-large (XL) or double extra-large (XXL), use the table below to translate the inch/millimeter measurement.
If the gloves you are purchasing come in numbered sizes, you can relate the measurement directly to the numerical size listed for the glove. For example, if the measurement taken is exactly eight inches (203 millimeters) then you would select a size eight glove. To avoid hand fatigue, order the next larger size for all measurements that are not exact inch/millimeter measurements. If the gloves you are purchasing come in extra-small (XS), small (S), medium (M), large (L), extra-large (XL) or double extra-large (XXL), use the table below to translate the inch/millimeter measurement.
| US Sizes | EU Sizes | ||
| 6–7 Inches | XS | 152–178 Milimeters | EU – 6 |
| 7–8 Inches | S | 178–203 Milimeters | EU – 7 |
| 8–9 Inches | M | 203–229 Milimeters | EU – 8 |
| 9–10 Inches | L | 229–254 Milimeters | EU – 9 |
| 10–11 Inches | XL | 254–279 Milimeters | EU – 10 |
| 11 + Inches | XXL | 279 + Milimeters | EU – 11 |
Source: Turtleskin Glove/Warwick Mills, Inc.
Another method is to measure the length of your hand by measuring from the bottom edge of the palm to the tip of the longest finger as illustrated below.
| US Sizes | EU Sizes | ||
| 6 5/16 Inches | XS | 160 Milimeters | EU – 6 |
| 6 3/4 Inches | S | 171 Milimeters | EU – 7 |
| 7 3/16 Inches | M | 182 Milimeters | EU – 8 |
| 7 9/16 Inches | L | 192 Milimeters | EU – 9 |
| 8 1/16 Inches | XL | 204 Milimeters | EU – 10 |
| 8 7/16 + Inches | XXL | 215 + Milimeters | EU – 11 |
Source: Turtleskin Glove/Warwick Mills, Inc.
There are six (6) classes of electrical gloves, and you know which class you need based on the voltages you will be working with. You can find the full OSHA guidelines in standard 29 CFR 1910.137
- Class 00 – Protects workers up to 500 VAC and 750 VDC
- Class 0 – Protects workers up to 1,000 VAC and 1,500 VDC
- Class 1 – Protects workers up to 7,500 VAC and 11,250 VDC
- Class 2 – Protects workers up to 17,000 VAC and 25,000 VDC
- Class 3 – Protects workers up to 26,500 VAC and 39,750 VDC
- Class 4 – Protects workers up to 36,000 VAC and 54,000 VDC
6843 N. Citrus Ave Ste. W Crystal River, Florida 34428 USA
We offer logo service on many of the PPE products we sell. To receive a custom quote please use this request form.
Related products
ATG MaxiFlex 34-845 Endurance Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Palm, Fingers & Knuckles – Dozen
ATG MaxiFlex 34-846 Endurance Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Full Hand – Dozen
PIP 09-H550SLPV Scrap King Seamless Knit PolyKor Engineered Yarn Glove – Split Cowhide Leather Palm and Kevlar Stitching – Pair
