FREE SHIPPING
on Safety Orders Over $99 or $8.99 Flat Rate Shipping on Orders Below $99 *Exclusions Apply*
IMPORTANT SHIPPING INFORMATION
Time-Sensitive Order?
Call 877-902-9417 or email cs@rajsupply.com to verify availability and shipping lead time.
ANSI/ISEA 105 – CUT A6 | ABRASION 5 | PUNCTURE 4
EN388 – ABRASION 3 | CUT X | TEAR 4 | PUNCTURE 2 | CUT TDM-100 F
Discover the GL408C gloves for precision handling with a level 5 abrasion and A6 cut rating. Enhanced with PU dipped palms and an 18G HPPE liner with PMXTECK for unparalleled protection and comfort. Featuring touchscreen capabilities and reinforced thumb saddles for added safety and durability.
-
Precision Grip: Polyurethane dipped palm and fingers provide superior grip in both wet and dry conditions, making them ideal for precise handling tasks
-
Triple Shield: 18G HPPE liner defends against punctures, cuts and abrasions ensuring unmatched protection and flexibility
-
Smooth Barrier: PMXTECK creates an exterior built for durability and a soft interior ensuring precise performance with soothing, breathable comfort
-
Screen Ease: Touchscreen compatibility enables seamless connectivity without removing gloves
-
Seamless Durability: Reinforced thumb saddle designed for longevity and added protection in high-stress areas
-
Sure Seal: Knit wrist cuff ensures added security, comfort and functionality
-
Tried and Tested: Meets ANSI/ISEA 105 – CUT A6 | ABRASION 5 | PUNCTURE 4 and EN 388 – 3X42F, ensuring quality and safety
| Size |
Small ,Medium ,Large ,XLarge ,2X |
|---|---|
| Brand | |
| ANSI Cut Level |
A6 |
| Features |
Touchscreen Compatible |
| Material |
HPPE |
| Coating |
Polyurethane |
| Package Quantity |
1 Pair |
| Thickness |
18 Gauge |
| Style |
Cut Resistant Gloves |
It is important to know how to measure the hand to get a proper fitting glove. Measuring the hand for correct fit will give the employee the best possible protection without compromising the task, duty or safety of the wearer. There are two suggested ways to find the correct glove size. One way is to measure the width of the hand — measure around the hand (a dominant hand measurement is preferred) with a tape measure as shown below. The dominant hand will be the right if you are right-handed and left if you are left-handed.
If the gloves you are purchasing come in numbered sizes, you can relate the measurement directly to the numerical size listed for the glove. For example, if the measurement taken is exactly eight inches (203 millimeters) then you would select a size eight glove. To avoid hand fatigue, order the next larger size for all measurements that are not exact inch/millimeter measurements. If the gloves you are purchasing come in extra-small (XS), small (S), medium (M), large (L), extra-large (XL) or double extra-large (XXL), use the table below to translate the inch/millimeter measurement.
If the gloves you are purchasing come in numbered sizes, you can relate the measurement directly to the numerical size listed for the glove. For example, if the measurement taken is exactly eight inches (203 millimeters) then you would select a size eight glove. To avoid hand fatigue, order the next larger size for all measurements that are not exact inch/millimeter measurements. If the gloves you are purchasing come in extra-small (XS), small (S), medium (M), large (L), extra-large (XL) or double extra-large (XXL), use the table below to translate the inch/millimeter measurement.
| US Sizes | EU Sizes | ||
| 6–7 Inches | XS | 152–178 Milimeters | EU – 6 |
| 7–8 Inches | S | 178–203 Milimeters | EU – 7 |
| 8–9 Inches | M | 203–229 Milimeters | EU – 8 |
| 9–10 Inches | L | 229–254 Milimeters | EU – 9 |
| 10–11 Inches | XL | 254–279 Milimeters | EU – 10 |
| 11 + Inches | XXL | 279 + Milimeters | EU – 11 |
Source: Turtleskin Glove/Warwick Mills, Inc.
Another method is to measure the length of your hand by measuring from the bottom edge of the palm to the tip of the longest finger as illustrated below.
| US Sizes | EU Sizes | ||
| 6 5/16 Inches | XS | 160 Milimeters | EU – 6 |
| 6 3/4 Inches | S | 171 Milimeters | EU – 7 |
| 7 3/16 Inches | M | 182 Milimeters | EU – 8 |
| 7 9/16 Inches | L | 192 Milimeters | EU – 9 |
| 8 1/16 Inches | XL | 204 Milimeters | EU – 10 |
| 8 7/16 + Inches | XXL | 215 + Milimeters | EU – 11 |
Source: Turtleskin Glove/Warwick Mills, Inc.
There are six (6) classes of electrical gloves, and you know which class you need based on the voltages you will be working with. You can find the full OSHA guidelines in standard 29 CFR 1910.137
- Class 00 – Protects workers up to 500 VAC and 750 VDC
- Class 0 – Protects workers up to 1,000 VAC and 1,500 VDC
- Class 1 – Protects workers up to 7,500 VAC and 11,250 VDC
- Class 2 – Protects workers up to 17,000 VAC and 25,000 VDC
- Class 3 – Protects workers up to 26,500 VAC and 39,750 VDC
- Class 4 – Protects workers up to 36,000 VAC and 54,000 VDC
6843 N. Citrus Ave Ste. W Crystal River, Florida 34428 USA
We offer logo service on many of the PPE products we sell. To receive a custom quote please use this request form.
Related products
PIP 07-KA700 Kut Gard A5 Seamless Knit ACP / Kevlar Blended Glove – Polyester Lining – Heavy Weight – Dozen
PIP 09-H550SLPV Scrap King Seamless Knit PolyKor Engineered Yarn Glove – Split Cowhide Leather Palm and Kevlar Stitching – Pair
PIP 120-MX2805 Maximum Safety Professional Mechanic’s Gloves, Black, 1 Pair (CLOSEOUT)
PIP 122-169 Maximum Safety Leather Anti-Vibration Gloves, 1 Pair
PIP 16-D622 G-Tek PolyKor Seamless Knit PolyKor Blended Glove – Polyurethane Coated Smooth Grip on Palm & Fingers – Dozen
